If you’re running a Smith & Wesson revolver—J, K, L, or N frame—and you’ve done any trigger work at all, you already know the problem. Light strikes. That click when you need a bang. It’s the kind of thing that gets you cussed out at the range or worse, leaves you holding a dead trigger when it counts. This Apex Tactical Specialties 108011 Firing Pin Kit is the fix, plain and simple.
Apex Tactical out of Prescott, Arizona, builds stuff that works. They’re not the new kid on the block; they’ve been making aftermarket parts for S&W revolvers and pistols long enough that their name carries weight. This kit comes with a hardened steel firing pin and a reduced-power return spring. The pin is machined from tool steel, properly heat-treated, and dimensioned to give you a longer, harder hit on the primer. The spring is lighter than stock, which reduces drag on the hammer fall. Put them together, and you get reliable ignition even with the lightest hammer spring you can run.
Let’s be real—most guys who are tuning a wheelgun for competition or carry end up swapping the hammer spring for a lighter one. That’s fine for double-action pull weight, but it also drops the energy the hammer transfers to the firing pin. Stock firing pins and springs weren’t designed for that. They were built to work with a heavy, factory hammer spring. Once you lighten the hammer spring, you’re asking for trouble. The Apex kit fixes that mismatch. The firing pin is longer and hits deeper, and the return spring doesn’t fight the hammer as much. You get reliable primer strikes with hammer springs that would leave a stock gun clicking.
This isn’t just for competition shooters. If you carry a J-frame as a backup or an L-frame on duty, you want every round to go off. Apex designed this kit with duty and carry in mind. It’s not a race-gun-only part. It’s built to hold up to thousands of rounds and still do its job. The pin is case-hardened for wear resistance, and the spring is stainless steel so it won’t rust out if you carry in sweat or rain. That matters in Montana, where you might be in the Bighorns one day and hunting whitetail along the Yellowstone the next. Your gear sees temperature swings, moisture, and dirt. This kit handles it.
Installation is straightforward if you know your way around a revolver. You’ll need to detail strip the frame and remove the old firing pin and spring from the recoil shield. Apex includes a new roll pin for retention, so you’re not reusing the old one. The whole job takes about 15 minutes if you’ve got the right punches and a good light. If you’re not comfortable doing it yourself, any competent gunsmith can handle it in under a half hour. We’ve got guys here in Billings who do it in the shop, but we also ship these kits out to folks who prefer to work on their own guns.
The price is $22.00. That’s a hell of a deal for what you get. A single light strike in a match or a defensive situation costs you way more than twenty-two bucks. This kit is cheap insurance. It’s also one of the first things we recommend to anyone who’s had a revolver action job done and still gets the occasional click instead of a bang.
Here at Firearms Montana, we’re a licensed FFL dealer based in Billings, Montana. We ship to all 50 states, but you already know that if you’re reading this. We stock Apex Tactical parts because they’re proven. We don’t sell gimmicks. We sell stuff that makes your gun run better or shoot straighter. This firing pin kit does exactly that. It’s a simple part swap that improves reliability with lightened hammer springs. No “next level” nonsense. No hype. Just a better firing pin and a better spring that work together like they should.
If you’ve got a S&W revolver with a trigger job, or you’re planning to do one, get this kit. Put it in before you start chasing ignition problems. It’s a small part that makes a big difference. And if you’ve got questions about fitting it to your specific frame size—J, K, L, or N—give us a call at the shop. We’re not reading from a script. We shoot these guns. We know what works in Montana winters and summer range trips. Apex Tactical makes the parts; we make sure they get to you fast, whether you’re in Billings or across the country.
Order online or stop in. We’ll get this kit headed your way, shipped to your FFL or direct to you if local. Either way, you’ll be back on the range with a revolver that goes bang every time.
Reviews
There are no reviews yet.